KT Waterproof Sealant

KT Waterproof Sealant
KT Waterproof Sealant

KT Waterproof Sealant membrane is a one part, easy to apply, specially formulated polyurethane based, elastic, crack bridging membrane which is designed to be used as an intermediate layer within a coating system. It cures to form a highly elastic, seamless, waterproof coating with excellent crack bridging properties. Its performance is maintained even at low temperatures

AREAS OF APPLICATION

  • Suitable for all exposed areas.
  • Roof slabs, parapet, Ips, sound brick-bat coba.
  • Sunshades Cementious water proofing.
  • Suitable surface preparation and repairs.
  • RCC/asbestos/lime terraced roofs.
  • Can be used as exterior coating for PVC water tanks exposed to direct sunlight on roofs, balconies, etc. to keep the inside water temperature relatively cooler.
  • For further reinforcement use glass fiber mesh on joints, drainpipe, corners or on any cracks.

 

CHARACTERSTICS AND ADVANTAGES

  • Waterproofing protection up to 7 bars hydrostatic pressure.
  • Reinforced with glass fibres for superior abrasion resistance.
  • Reduces carbon dioxide and chloride in diffusion and thus protecting re-bars against corrosion.
  • High shine, sparkling white colour and thick coat results and high levels of heat reflectance. 
  • Algae and fungi resistant.
  • Cross linking polymer gives excellent weather resistance and enhances service life.
  • Excellent adhesion to concrete, brickwork, corrugated asbestos, asbestos cement sheet and metal decks.
  • Ultra violet rays and weather resistant.
  • Crack bridging due to elastomeric.
  • No Protective screed required for normal Foot Traffic.

 

TECHNICAL INFORMATION

Chemical Base:

Solvent Base Polyurethane

  

Density: 

1.25 ± 0.03 gr/ml

(ASTM D1875)

Appearance/Color: 

Liquid, White Colors

  

Surface Curing: 

6-10 h (23°C and %50 R.H.)

(ASTM C679)

Viscosity: 

5500±1000 cps

  

Ready for foot traffic*: 

24-36 h (23°C and %50 R.H.) 

(ASTM C679)

Full Cure: 

7 days (23°C and %50 R.H.)

  

Shore A Hardness: 

55

(ASTM D 2240)

% Elongation: 

≥ % 400 

(DIN EN ISO 527)

Consumption (two-layer)**: 

1.3-1.5 kg/m2

  

Consumption (three-layer)**: 

2.0-2.3 kg/m2

  

Solid Content: 

Weight ~% 86 (23°C and %50 R.H.)

  

Tensile Strength: 

2.8 N/mm2 

(DIN 53504)

Heat Resistance: 

-20oC and +80oC

  

Application Temperature: 

+5oC and +35oC

  


 

PACKAGING

5 kg, 25 kg

 

SHEL LIFE AND STORAGE

Best before 24 months if stored properly in undamaged and unopened original sealed packaging